Page: 10 of 18
Copyright © 2017 GenTent® Safety Canopies, LLC – All Rights Reserved V6.6.2–November, 2017
4) Set Rod Adjustment Pin
- Reference Appropriate Easy Adjustment Guide (previous page) for GenTent 10k or
GenTent 20k
- Measure length and width of generator frame to the outside of the frame members
- Find corresponding pin setting number in Easy Adjustment Guide
- Set the telescoping rod location (Fig. 4-A and 4-B) based on the setting number from
the Easy Adjustment Guide and install set pin to secure
Fig. 4-A
Fig. 4-B
Settings Notes:
(a)
Rod location for setting 0 and 1 are the same (Fig. 4-A). Use the inside frame
rod hole for setting 0 and the outside frame rod hole for settings 1-4.
(b)
SMALL indicates that the use of a Four corner frame extension kit is required.
The GenTent will be too loose on the frame otherwise.
