Gentec 203605, Руководство пользователя

Страница: 27 / 58

Beamage-M² User Manual Revision 6 20
5.2.1. Open M² File
Load an *. m2geo file containing the complete information of a saved M
2
measurement: the beams and the
images that correspond to these measurements will be loaded. This process can take several seconds.
The PC-Beamage Software uses hard drive space to load the *.m2geo files that contain M² measurement
information; if your hard drive has less than 20% of its total capacity available, a pop-up window will appear,
notifying this information. Press OK to keep on using the PC-Beamage software (see
Figure 5-11 ).
Figure 5-10: Open M² File
Figure 5-11: Less than 20% of available space on the hard disk
If your hard drive has less than 10% of its total capacity available, a pop-up window will appear,
notifying this information. Press OK to keep on using the PC-Beamage software (see Figure 5-12).
Figure 5-12: Less than 10% of available space on the hard disk
But, if your hard drive has less than 255 Mb of available space, a pop-up window will appear,
notifying this information. You should free some space on your hard drive to continue to save or
load a file. This includes * .m2geo files, * .m2man files and * .bmg files (see
Figure 5-13 ).