Genmitsu Jinsoku LC-60A, Руководство пользователя

Страница: 30 / 65

28
Software Installation
Cutting the Test File - LaserGRBL
Step 1:
F ile→ Open File: Open GCODE file or
Image format file, Here use "Letter A.JPG" as
the test file.
Step 3: Set the Speed and S Values.
Depending on Materials they will require different speeds
and Values.
Material: 2mm thickness
basswood multilayer
board
Speed: 300 mm/min
S-Max: 10000
Step 4: Click the direction button to control the machine
to reach the starting point, click "set Zero point" and
then click "run program" to start cutting.
Step 2: Select the "Vectorize" as conversion
tool, then click "next".