Genmitsu Jinsoku LC-60A, Руководство пользователя

Страница: 10 / 65

08
Mechanical Installation
Note
1.Please read the instructions carefully before installation.
2. When using the laser, you must wear goggles to avoid accidental laser exposure.
3.When engraving mirror, stainless steel and other reflective materials, please paint the surface black to
prevent damage to the laser head from reflective light.
4.The machine should be placed securely on a flat surface to avoid dropping or being hit, and it is recommended
to install smoke extractor when working with the laser.
5.To avoid laser damage to the desktop surface, please add another wood or metal layer whether or not you
are using the honeycomb working table.
6.After long hours of engraving or cutting, laser head lens will be dirty due to smoke, it is recommended to
clean the lens regularly, you can use a cotton swab dipped in alcohol to clean the lens.
7. The leg extension only supports rotary roller setup.