Genmitsu Jinsoku LC-60A, Руководство пользователя

Страница: 13 / 65

11
Mechanical Installation
Step 3: Installing X-axis Module
1.Place the X-axis module in the grooves of the two Y-axis modules.
2. Adjust the X-axis module to align the four screw holes on the X-axis module with the holes on the Y-axis module.
3. Slide the four M5
× 30 screws into the X-axis module and tighten them into screw holes on the Y-axis modules.
4.Before you move to the next step, check the X-axis module position to make sure the aluminum profile fit right into the
grooves on both sides.
X-axis Module
Groove
M5 × 30 Screws M5 × 30 Screws
Groove