ENGLISH
2
Key Mapping Functions
For certain racing games, the brake and acceleration function may be not relate to the BRAKE pedal or ACCELERATION pedal.
With the help of Key Mapping, you can duplicate the function to your favor buttons.
Note that
Wireless Trio Racer
can only set the KeyMapping function at buttons 5/6/7/8, Brake Pedal and Acceleration pedal.
Each KeyMapping operation only can duplicate one key to another.
1.
Set Key Mapping Function:
Press and hold Button 10/Start and press Turbo button at the same time. The TURBO LED
will be blinking fast to show the activation of the KeyMapping function. Press your favor
TARGET
button which you would
like to copy that function to it. The TURBO LED will now blink slowly. Then, press the
SOURCE
button to duplicate its
function to the
TARGET
button to complete the procedure. The TURBO LED will turn off to indicate the function duplication
is complete. Use these procedures again for other function duplication.
2.
Release Key Mapping Function:
Press and hold Button 10/Start and press Turbo button at the same time. TURBO LED
will be blinking fast. Press the
TARGET
button which you would like to release that function. The TURBO LED will now
blink slowly. Then, press and hold Button 10/Start, and press Turbo at the same time to release the function. The TURBO
LED will turn off to indicate the releasing is complete. Use these procedures again for each function release. Or you can
unplug
Wireless Trio Racer
to release the KeyMapping function.
3. The hardware function of the wheel buttons may vary in different games. Before proceeding to game settings from the
OPTION inside the game, always read your game’s manual carefully to set the best game settings.
Important Information:
1. Please use AA Size Alkaline Batteries. And, replace the batteries at the same time with same types of batteries. Due to the
output voltatge of rechargeable battery is much lower than Alkaline’s, the racing wheel may detect the power voltage is too
low and responds with low power signal with Green LED flashing. It is normal. Use can continue playing the wheel till it is
running out of power.
2. To save power, turn the power switch to OFF position whenever you do not want to play it.
