1
D
.
The Optionally, you can connect to certain scoreboard controllers wirelessly via RF signal if
available (for a full list please contact Sportzcast support).
-To enable wireless reception, connect the supplied antennas to both locations on the back of
the ScoreHub2 device.
2.
Power the ScoreHub2
2
A
.
Connect power to the device by connecting the supplied Power Cable to the device & into a
standard US power outlet.
Note: You can connect to the ScoreHub2 either via built-in Wi-Fi, or via a
traditional wired network connection.
For Wi-Fi, see
Section 3
below:
For Wired, see
Section 4
below:
3.
Connect via Wi-Fi Network
3
A
.
When the ScoreHub2 is initially powered on, it will emit a Wi-Fi network which will allow you to
connect & configure the device settings. To connect, search for available Wi-Fi networks on a device.
-Your ScoreHub2 device’s network will be displayed as “
ScoreHubII-(unique device ID)
”.