To begin, locate your ScoreHub2 shipment:
Included within the box:
Power Cables ScoreHub2 Device Antennas Scoreboard Interface Cable
1.
Connect to your venue scoreboard system
1
A
.
To hardwire your device to the scoreboard system, locate the Scoreboard Interface cable. This
is how you will connect your ScoreHub to your existing scoreboard system.
You may have received a cable specific for your scoreboard type with a single connector, or a
cable with 3 connectors on the end (the standard multi-interface cable). Included in the
standard multi-interface options are connectors for multiple scoreboard types
Note:
the cables are color coded for identification: (Gray=Daktronics/Electromech,
Red=Fairplay, and Black=Nevco).
If you did not receive an appropriate cable, or require a custom type of scoreboard cable,
please contact Sportzcast Support at
321-888-3800
.
1
B
.
Connect the 9-pin connector to the ScoreHub2 device & hand tighten the 2 screws to secure
the cable.
1
C
.
The other end of the cable connects to your existing scoreboard system. You can connect to
the system either:
-
At the scoreboard distribution unit (if available).
This is typically located within
an equipment rack inside the venue. Connect the other end of the scoreboard interface cable
to an unused, available “output” port. Depending on your scoreboard type & installation
options, you may require a custom interface cable. Please contact Sportzcast for specific
information if needed.
- As a backup option, you can connect to the venue scoreboard controller itself. Locate
a spare, unused output port on the venue scoreboard controller and connect the other end of
the cable.
