English
-26-
PLAYBACK MODE - THE BASICS
Viewing Images
You can display the still images one by one.
1. Rotate the mode dial to
,
,
,
, ,
or
and turn your camera on
by pressing the power switch.
2. Press the
button.
The last recorded image appears on
the LCD monitor screen.
Basic information is shown by
indicators on the LCD monitor
screen. To see full information
display, press the OK button.
3. Use the four-way controller (
) to select the desired images.
To view the previous image, press the four-way controller ( ).
To view the next image, press the four-way controller ( ).
NOTE
For protected images/movie clips,
mark will be displayed. Refer to the section
“
Protecting Images/Movie Clips”
for further details.
For images selected for printing with DPOF setting,
mark will be displayed. (Refer to
the section
“Setting the DPOF”
for further details.)
If there is no image stored in the internal memory or on the SD memory card, [No image]
message will appear on the LCD monitor screen.
You cannot enter the Playback mode from the Setup mode.
Magnifying Images
While reviewing your images, you may enlarge
a selected portion of an image. This
magnification allows you to view fine details.
The zoom factor displayed on the screen
shows the current magnification ratio.
1. Press the button.
The last recorded image appears on
the LCD monitor screen.
To view the previous image, press
the four-way controller ( ).
To view the next image, press the four-way controller ( ).
2. Adjust the zoom ratio by using the /
button.
