English
-16-
GETTING STARTED
Attaching the Hand Strap
To prevent accidental slippage during use, always use
the strap.
Attach the camera strap as follows:
1. Thread the small loop of the hand strap through the
hand strap eyelet on the camera.
2. Pull the large loop through the small loop until the strap
is firmly secured
Installing Batteries
You can use 2 AAA size batteries (Alkaline, Ni-MH) to
power the camera.
1. Make sure the camera is off.
2. Slide the battery/SD card cover in the direction of
the [OPEN] arrow.
3. Insert the batteries according to the correct polarity
marks (+ or -).
4. Close the battery/SD card cover firmly.
NOTE
Avoid using batteries in extremely cold environments as low temperatures can
shorten the battery life and reduce camera performance. This low temperature will
also influence alkaline battery performance, therefore Ni-MH rechargeable battery is
highly recommended.
If you will not be using the batteries for an extended period of time, remove them
from the camera to prevent leakage or corrosion.
Never use batteries of different types (together) or mix old and new batteries.
Never use manganese batteries.
