English
-13
Closing the battery cover
Note:
Do not apply excessive force on the battery cover as it may cause damage.
When using your digital camera, if the battery charge is one mark on the battery level icon,
you will not be able to continue operating the flash.
Ú
When the battery charge turns red, you will not be able to continue to operate
“
Photo
mode” and “
Movie
mode”.
Ú
When replacing the batteries, the camera retains the date/ time settings for
approximately three minutes. Please check your date/ time settings after the
batteries are replaced.
Battery status
The battery level icon has four types of indications: Full
, Half-full
, Low
,
Empty
Inserting the memory card
Please switch the camera off.
1. Inserting the memory card
This is what the memory card slot
looks like.
Insert the memory card into the slot in
the way shown.
2. Removing the memory card
Gently press on the memory card
The memory card will automatically
eject. Pull the card out in the direction
indicated.
Note:
Before using, please insert your SD memory card into the memory card slot on the bottom
of the camera. If the card is full or contains other data, you can access
Format
in “
Setup
mode”
using the
Mode Selector
button to format your memory card.
The digital camera has a built-in memory of 32MB. When a memory card is inserted into
the camera, the camera will take it to be the primary storage media.
Ú
The camera accepts only SD or MMC memory cards.
Ú
When using SD memory card, please switch the camera off before inserting or
removing the SD memory card.
Built-in memory and memory card in use display on the camera.
Ú
When the camera’s built-in memory is in use,
will be displayed. When the
