Genio 050180 Скачать руководство пользователя страница 4

4

2 Intended use

The tool is designed for screwing and unscrewing as well as for drilling in wood, metal, ceramic and plastic 
materials. This tool should not be used for purposes other than those described above. 

3 Before use

Before turning on the cordless drill, read the following notes:

1

 

Charge the battery with the charger provided with the tool. A fully discharged battery recharges in one hour. 

2

 

Use only appropriate bits and tip screwdrivers.

3

 When screwing and drilling into walls, check for power lines, gas or water hidden.

4 Use

4.1. Charging the battery (B2-B3)
1

  Pull the battery (5) of its abse, resting on the bottom base.

2

  Check if the power voltage on the rating plate corresponds to the voltage available. 

3

  Install the battery into the charger. The red LED indicates that the battery is charging. Once loaded, the red LED turns  

  off and the green LED stays on continuously. The load is lasted 1 hour (approx.) in case of a fully discharged  
 battery. 

4

  During charging, it is normal for the battery to warm slightly. If you can not charge the battery, check:

 

>

 That the socket has voltage. 

 

>

 That the charger contacts are reliable. 

If you still can not load, please send to our post-sales service:
 

>

 The charger

 

>

 The battery

It is necessary to recharge the battery in time in order to ensure good durability. This is absolutely necessary from 
the moment you notice that the power of the cordless drill decreases. 
Never discharge the battery completely. You can damage it!

  

CAUTION: recharge the battery regularly, for example once every six months.

4.2. Setting the torque (B4)

The drill is provided with a mechanical adjustment of torque. This can be adjusted to a size screw for its adjustment 
wheel. The torque depends on several factors:

 >

 The type and hardness of the material to be treated.

 >

 The type and length of the screws used.

 >

 Of the requirements to be met by bolted joints. 

If the torque is reached, a chirp indicates that the uncoupling has been done. Attention! Do not regulate the 
adjusting ring by the torque until the machine stops. 

050180 User Manual EN.indd   4

12/9/16   9:52

Содержание 050180













Отзывы: