Genie Z-62/40 TRAX, Руководство оператора

Страница: 31 / 64

First Edition • Second Printing Operator's Manual
Controls
Part No. 1272873GT Z
®
-62/40 TRAX
™
29
13 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.
14 Dual axis proportional control handle for drive
and steer functions
OR Proportional control handle for drive
function and thumb rocker for steer function.
Move the control handle in the direction
indicated by the blue arrow on the control panel
and the machine will drive forward. Move the
control handle in the direction indicated by the
yellow arrow and the machine will drive
backwards. Move the control handle in the
direction indicated by the blue triangle and the
machine will steer to the left. Move the control
handle in the direction indicated by the yellow
triangle and the machine will steer to the right.
OR
Move the control handle in the direction
indicated by the blue arrow on the control panel
and the machine will drive forward. Move the
control handle in the direction indicated by the
yellow arrow and the machine will drive
backwards. Press the left side of the thumb
rocker and the machine will steer to the left.
Press the right side of the thumb rocker and
the machine will steer to the right.
15 Drive enable indicator light
Light on indicates that the boom has moved
just past either non-steer wheel and drive
function has been interrupted.
16 Drive enable switch
To drive when the drive enable light is on, hold
the drive enable switch to either side and
slowly move the drive control handle off center.
Be aware that the machine may move in the
opposite direction that the drive and steer
controls are moved.
17 Diesel models: Glow plug switch
Move the glow plug switch to either side and
hold for 3 to 5 seconds.
18 Engine idle (rpm) select switch
Move the engine idle select switch to the turtle
position for foot switch activated low idle.
Move the engine idle select switch to the rabbit
position for foot switch activated high idle.
19 Engine start switch
Move the engine start switch to either side to
start the engine.
20 Models with LCD screen: Engine shut-down
indicator light
Light on indicates that the engine has shut
down. Contact service personnel.
21 Gasoline/LPG models: Fuel select switch
Move the fuel select switch to the gasoline
position to select gasoline. Move the fuel select
switch to the LPG position to select LPG.