Genie Z-62/40 TRAX, Руководство оператора

Страница: 30 / 64

Operator's Manual First Edition • Second Printing
Controls
28 Z
®
-62/40 TRAX
™
Part No. 1272873GT
Platform Control Panel
Pictures in this manual may show a boom with tires
and wheels instead of tracks. All safety information
and operating instructions still apply to the Z-62/40
TRAX, even if the picture does not show the tracks.
1 Horn button
Press this button and the horn will sound.
Release the button and the horn will stop.
2 Platform level switch
Move the platform level
switch up and the level of the
platform will raise. Move the
platform level switch down
and the level of the platform
will lower.
3 Platform rotate switch
Move the platform rotate
switch to the right and the
platform will rotate to the
right. Move the platform
rotate switch to the left and
the platform will rotate to
the left.
4 Jib boom up/down switch
Move the jib boom switch
up and the jib boom will
raise. Move the jib boom
switch down and the jib
boom will lower.
5 Not used
6 Machine not level indicator light
The machine not level indicator light will come
on when the tilt alarm sounds.
7 Emergency power switch
Use emergency power if the primary power
source (engine) fails.
Simultaneously hold the emergency power
switch to either side and activate the desired
function.
8 Drive speed select switch
Machine on incline symbol: Low range
operation for inclines.
Machine on level surface symbol: High range
operation for maximum drive speed.
9 Platform control box heater (if equipped)
Move the heater switch up to turn on the
platform control box heater. Move the heater
switch down to turn off the platform control box
heater.
10 Generator switch (if equipped)
Move the generator switch up to activate the
generator. Move the switch down to turn off the
generator.
11 Aircraft protection override switch (if equipped)
Move and hold the aircraft protection override
switch to operate the machine when the
platform bumper is against an object.
12 Not used