Genie Z-40, Руководство оператора

Страница: 38 / 63

Operator's Manual First Edition • First Printing
Inspections
36 Z-62/40 Part No. 1257653
Test the Lift/Drive Select Function
49 Press down the foot switch.
50 Move the drive control handle off center and
activate a boom function toggle switch.
Result: No boom functions should operate.
The machine will move in the direction
indicated on the control panel.
Repair any malfunctions before operating the
machine.
Test Aircraft Protection Package
(if equipped)
Note: Two people may be required to perform this
test.
51 Extend the primary boom approximately
30 cm.
52 Move the yellow bumper at the bottom of the
platform 10 cm in any direction.
53 Activate each function control handle or toggle
switch.
Result: No boom and steer functions should
operate.
54 Move and hold the aircraft
protection override switch.
55 Activate each function control handle or toggle
switch.
Result: All boom and steer functions should
operate.