8
3.1 Installing the Camera
Please make sure that the wall or ceiling is strong enough to withstand 3 times the weight
of the camera. Please install the camera in and under a dry environment and place the
cover of the camera within 4 hours of removing it.
1. Remove the fixed ring from the gap of the camera (see Installing SD Card
2. Drill the screw holes and cut the cable hole (A) in the ceiling according to the drill
template.
3. Route and connect the cables.
4. Fix the camera to the wall with screws as shown below.
5. Install the fixed ring back to the camera.
3.0 Installation
