background image

CHANGE THIS TO WHAT THE PRODUCT IS AND COPY INTO THE MASTER PAGE A

 

8

Use Correct Coaxial Cable

Coaxial cable is the transmission medium we use for our VDS devices. Varieties of Coax could be found, but users 

should always avoid using coax whose inner conductor is made of copper clad steel. Steel has greater DC resist-

ance, which lowers power transmission capability. Table 2 shows the general specifications of the RG-6/U coaxial 

cable that we normally recommend. Remember that the total value of DC resistance is the sum of DC resistance 

from both the inner and outer conductors.

Table 2. General Specifications of the RG-6/U Coax

Packing Checklist

Carefully unpack the packing box of the VDS4020 and check if the following items are included:

• 

VDS4020-R Sender (Remote Unit)

• 

VDS4020-L Viewer (Local Unit)

• 

A power supply unit (an AC to DC power adaptor) and a power cord

• 

Four mounting brackets for the unit, two holding brackets for the poweradaptor, six screws and six nylon 

anchors

• 

1 foot cat-6 network patch cable with molded RJ-45 boot

• 

Installation Guide

Contact your dealer immediately if any of the above items appears damaged or the unit does not work.

Содержание VDS4020










Отзывы: