CHANGE THIS TO WHAT THE PRODUCT IS AND COPY INTO THE MASTER PAGE A
6
Installation of Remote and Local Units
The VDS4020 units can both be fixed to the wall or the desktop with the
supplied mounting brackets. The mounting brackets can be fixed onto the
rear, top, or bottom of either unit.
Attaching the Mounting Brackets
Attach the mounting brackets to either the Sender Unit or the Viewer Unit as shown
below:
1. Align the mounting bracket with the mounting track.
2. Slide the bracket until the white nub clicks into place and locks the unit to the mount.
3. Repeat the same steps for the second bracket.
4. Fasten the unit in the desired location with two screws.
Removing the Mounting Brackets
Use a flat-tipped screwdriver to lift the white nub to remove the brackets.
