Genie S-100HD Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 55

background image

Operator's Manual

Second Edition

y

First Printing

Operating Instructions

44

S-100HD • S-120HD

Part No. 1261387

Platform Overload Indicator Light

Light flashing indicates the

platform is overloaded and no
functions will operate.

Remove weight from the
platform until the light goes off.

Overload Recovery

If the ground controls LCD screen displays
OVERLOAD RECOVERY, the emergency lowering
system has been used while the platform was
overloaded. For information on how to reset this
message, please consult the appropriate Genie
Service Manual.

Out of Operational Envelope
Recovery

If all functions stop operating, you may have
exceeded the operational envelope.

Retract Boom indicator light is flashing: Use the

Auxiliary Power Unit at the platform to retract the
boom until the indicator light is off. Restart the
engine to continue operation.

Raise Boom indicator light is flashing: Use the
Emergency Power Unit at the platform to raise the

boom until the indicator light is off. Restart the
engine to continue operation.

If the Emergency Power Unit at the platform does
not function, a trained operator on the ground will

need to lower the platform from the ground controls.
Please see the Service Bypass / Recovery Key
Switch section in the service manual.

After Each Use

1

Select a safe parking location—firm level
surface, clear of obstruction and traffic.

2

Retract and lower the boom to the stowed
position.

3

Rotate the turntable so that the boom is
between the non-steer wheels.

4

Turn the key switch to the off position and

remove the key to secure from unauthorized
use.

Machine Not Level Indicator Light

(if equipped)

If the tilt alarm sounds when the
platform is raised, the Machine

Not Level indicator light will
come and the drive function in
one or both directions will not

operate. Identify the condition of
the boom on the slope as shown
below. Follow the steps to lower
the boom before moving to a
firm, level surface. Do not rotate
the boom while lowering.

If the tilt alarm sounds with the
platform uphill:

1 Lower the boom.

2 Retract the boom.

If the tilt alarm sounds with the
platform downhill:

1

Lower the boom.

2

Retract the boom.

«
...
44
45
46
47
48
...
»

Содержание S-100HD
























































Отзывы:

Нет отзывов

Похожие инструкции для S-100HD

Бренд: Fronteq Страницы: 48

Бренд: Terex Страницы: 135

Бренд: ATN Страницы: 81

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды