6
2.0 Product Installation
Installation Safety Precautions
To avoid damage to the equipment or personal injury caused by improper use,
please observe the following precautions:
• The power is kept off during the installation process. Wear an ESD-preventive
wrist strap and ensure that the wrist strap is in close contact with the skin.
• The switch can work normally under the correct power supply. Please confirm
that the power supply voltage matches the voltage indicated by the switch.
• Before powering on the switch, please make sure that the power circuit is not
overloaded as this can affect the normal operation of the switch and can cause
unnecessary damage.
• To avoid the risk of electric shock, do not open the case while the switch is
working and on, even if it is not charged, do not open it.
• Before cleaning the switch, pull out the power plug of the switch. Do not wipe
with a moist fabric and do not use liquid to clean.
Temperature and Humidity
In order to ensure long-term stable operation of the switch and prolong its working
life, please maintain a certain temperature and humidity in the environment it’s
placed in. Excessively high or too low ambient humidity may cause leakage,
deformation or even corrosion of metal parts. If the temperature is too high,
the aging process of the insulation material will be accelerated, which will
seriously affect the working life of the equipment. Normal operation and storage
temperature / humidity of this series of switches are shown below:
Altitude
Products with this mark are only suitable for safe use in areas below 2000m.
Environment
Temperature Relative Humidity
Working
Environment
0°C~40°C
10%~90%
RH Non-condensing
Storage
environment
-40°C~70°C
5%~90%
RH Non-condensing