October 2015
Second Edition - First Printing
Part No. 57.0009.0662 GTH-1256 19
Controls
17 Hazard warning lights switch (if equipped)
Push the switch to turn the hazard warning
lights on. Release the switch to turn the hazard
warning lights off.
18 Transmission control lever
Move the transmission control lever forward you
for forward gear. Move the lever toward you
for reverse gear. Move the lever to the center
position for neutral.
19 Lock/unlock enabling switch (if equipped)
Push and hold the switch to enable the coupling
or the release of the attachment, managed by
the
Auxiliary hydraulics switch 10
.
20 A/C switch (if equipped)
Push the switch to turn the A/C on. Release the
switch to turn the A/C off.
21 Cab heater fan switch (if equipped)
Push the switch to turn the cab heater fan on:
first position for low speed and second position
for high speed. Release the switch to turn the
cab heater fan off.
22 DPF switch (DEUTZ engine configuration)
Push the switch to enable the DPF regeneration.
23 “Shift-on-fly” button
Push and hold the button to shift from one gear
to another when the machine is travelling. Use
this button only when the “Shift-on-fly” indicator
light is lit with a solid light. While traveling less
than 3 mph on slopes the shift on the fly system
may not allow 2nd to 1st gear transition. Shift to
1st gear before ascending steep slopes. Come
to a complete stop using the service brake before
shifting from 2nd to 1st gear.
25 Rear Object Detection System (RODS) (if
equipped)
Refer to supplemental operator’s manual
26 Diagnostic button
Push the button to scroll the LCD screen menu.
27 Stabilizers switches
Push the top of the switches to extend and lower
the stabilizers. Push the bottom of the switches
to raise and retract the stabilizers.
