background image

Part No. 52546

Genie GS-2668 DC & GS-3268 DC

21

Operator's Manual

First Edition • Seventh Printing

OPERATING INSTRUCTIONS

To Extend and Retract Platform
(Manual Platform Extension)

1 Lift the platform extension lock handle to the

horizontal position.

2 Push the platform extension lock handle to

extend the platform to the desired position.

Do not stand on the platform extension while trying
to extend it.

3 Lower the platform extension lock handle.

GS-2668DC models: The platform extension limit
switch (if equipped) will disable the drive function
when the platform is extended and the platform is
raised above 20 ft / 6.1 m. Lower the platform or
retract the platform extension to drive the machine.

GS-3268DC models: The platform extension limit
switch will disable the drive function when the
platform is extended and the platform is raised
above 26 ft / 7.9 m. Lower the platform or retract
the platform extension to drive the machine.

To Extend and Retract Platform
(Powered Platform Extension -
option)

1 Press and hold the platform extend/retract

enable button.

2 Move the control handle in the blue direction to

extend the platform or in the yellow direction to
retract the platform.

GS-2668DC models: The platform extension limit
switch (if equipped) will disable the drive function
when the platform is extended and the platform is
raised above 20 ft / 6.1 m. Lower the platform or
retract the platform extension to drive the machine.

GS-3268DC models: The platform extension limit
switch will disable the drive function when the
platform is extended and the platform is raised
above 26 ft / 7.9 m. Lower the platform or retract
the platform extension to drive the machine.

Operation From Ground with
Controller

Maintain safe distances between operator,
machine and fixed objects.

Be aware of the direction the machine will travel
when using the controller.

After Each Use

1 Select a safe parking location—firm level

surface, clear of obstructions and traffic.

2 Lower the platform.

3 Turn the key switch to the off position and

remove the key to secure from unauthorized
use.

4 Chock the wheels.

5 Charge the batteries.

Содержание GS-2668DC































Отзывы: