Genie GS-2668 RT Скачать руководство пользователя

Страница: 34 / 46

Operator's Manual

Fifth Edition · Second Printing

GS-2668 RT • GS-3268 RT

Part No. 133534

Drive Select Button

Machine on incline symbol:
Low range operation for inclines

Indicator Light On Red

If the indicator light is on red, push
in and pull out the red Emergency
Stop button to reset the system.

If the light stays red, tag and
remove the machine from service.

Indicator Light Flashing Red

If the indicator light is flashing red,
the platform is overloaded and no
functions will operate. An alarm will
sound at the platform controls.

Remove weight from the platform.

Push in and pull out the red Emergency Stop button
to reset the system.

If the platform is still overloaded, the light will
continue to flash.

Operation From Platform

1 Turn the key switch to platform control.

2 Pull out the ground and platform red Emergency

Stop button to the on position.

3 Start the engine.

To Position Platform

1 Push and hold the lift function

enable button.

2 Activate the up/down rocker

switch in the desired direction.

To Steer

1 Press and hold the function enable switch on the

control handle.

2 Turn the steer wheels with the thumb rocker

switch located on the top of the control handle.

To Drive

1 Press and hold the function enable switch on the

control handle.

2 Increase speed: Slowly move the control handle

off center.

Decrease speed: Slowly move the control

handle toward center.

Stop: Return the control handle to center or

release the function enable switch.

Use the color-coded direction arrows on the
platform controls and on the platform to identify the
direction the machine will travel.

Machine travel speed is restricted when the
platform is raised.

Operating Instructions

Содержание GS-2668 RT















































Результаты поиска

Содержание GS-2668 RT

Отзывы:

Похожие инструкции для GS-2668 RT

Бренды по названию

Популярные бренды

Genie GS-2668 RT, Руководство оператора

Результаты поиска

Содержание GS-2668 RT

Отзывы:

Похожие инструкции для GS-2668 RT

Бренды по названию

Популярные бренды