Genie GS-2668 RT Скачать руководство пользователя | Manualshive

Страница: 23 / 46

background image

Operator's Manual

Fifth Edition · Second Printing

Part No. 133534

GS-2668 RT • GS-3268 RT

21

Do Not Operate Unless:

You learn and practice the principles of safe

machine operation contained in this operator's
manual.

1 Avoid hazardous situations.

2 Always perform a pre-operation

inspection.

Know and understand the pre-operation

inspection before going on to the next
section.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

Pre-Operation Inspection
Fundamentals

It is the responsibility of the operator to perform a
pre-operation inspection and routine maintenance.

The pre-operation inspection is a visual inspection
performed by the operator prior to each work shift.
The inspection is designed to discover if anything
is apparently wrong with a machine before the
operator performs the function tests.

The pre-operation inspection also serves to
determine if routine maintenance procedures are
required. Only routine maintenance items specified
in this manual may be performed by the operator.

Refer to the list on the next page and check each
of the items.

If damage or any unauthorized variation from
factory delivered condition is discovered, the
machine must be tagged and removed from
service.

Repairs to the machine may only be made by a
qualified service technician, according to the
manufacturer's specifications. After repairs are
completed, the operator must perform a
pre-operation inspection again before going on to
the function tests.

Scheduled maintenance inspections shall be
performed by qualified service technicians,
according to the manufacturer's specifications and
the requirements listed in the responsibilities
manual.

Inspection

«
...
21
22
23
24
25
...
»

Содержание GS-2668 RT















































Отзывы:

Нет отзывов

Похожие инструкции для GS-2668 RT

Бренд: Skyjack Страницы: 130

LightLift 17.75 3S

Бренд: Hinowa Страницы: 129

Бренд: Terex Страницы: 62

Бренд: EAE Страницы: 40

Бренд: DINGLI Страницы: 74

Бренд: Skyjack Страницы: 112

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды