25
WALL CONTROL OPERATIONAL FEATURES
FOR HELP- GENIECOMPANY.COM
Fig. 4-5
1. Wall console. Fig. 4-5.
A. Vacation locking switch.
– Lock disable all controls after door closes..
– Unlock allows all controls to work normally.
NOTE: Carriage must stay in contact with
“CLOSE” limit switch in order for the vacation
locking switch to work.
B. Door control button.
– Opens and closes door from inside garage.
– Lights on shows system has power available
and vacation switch is not locked.
– Lights out shows either power is not
available or vacation locking switch is locked.
C. Independent light control.
– Turns operator lights on and off without
moving door.
2. Wall Button
– Operates door from inside garage.
A
B
C
SECT 5 —LIGHT & LENS INSTALLATION
FOR HELP-1.800.354.3643
1. Install light bulbs.
• 2 bulbs.
– No more than 60 watts each.
– Do Not use short neck bulbs.
– Whenever possible, use bulbs rated for:
Rough service
Vibration
Appliances
2. Install lens.
• Hook bottom hinges into slots at bottom of
front plate. Fig. 5-1.
• Swing lens up over lights. Check for alignment
between the screw holes in the Lens and those
on the metal front plate.
• Lens will be fastened with 2 pan head screws.
([42] green parts bag). Fig. 5-2.
DO NOT FASTEN YET! Wait until you have
completed programming the Remote Controls.
Fig. 5-1
Fig. 5-2
#8 x 3/8" Pan head screw
[42]
bottom of lens cover hooks
into slots in front plate
pan head screws
secure top of lens
