Genie AWP Super Series, Руководство по обслуживанию

Страница: 50 / 207

Service Manual September 2016
Checklist B Procedures
50 AWP Super Series • IWP Super Series Part No. 38139
B- 5 C heck the Lifti ng Chain Adjustment B-5
Check the Lifting Chain
Adjustment
Genie specifications require that this procedure be
per formed every 250 hours or quarterly, whichever
comes first.
Maintaining proper adjustment of the lifting chains
is essential to safe machine operation. Failure to
maintain proper chain adjustment could result in
unsafe operating conditions and may cause
co mponent damage.
1 Fully lower the platform to the stowed position.
2 Measure the maximum height of the machine.
IWPS models: Turn the screw jacks
counterclockwise to the full up position. Pull
the base lowering handle to lower the base.
Result: The machine should be no taller than
specification.
Note: If measurement does not meet specification,
adjust the chains. Refer to Repair Procedure, How
to Adjust the Lifting Chains .
3 AWPS models: Measure the distance
between the top of the base frame and the
bottom edge of the platform.
IWP models: Measure the distance between
the bottom edge of the platform to the top of
the counterweight.
Result: The measurement should be no less
than specif ication.
Note: If measurement does not meet
specification, adjust the chains. Refer to
Repair Procedure, How to Adjust the Lifting
Chains .
Specifications
Model Height Measurement
(step 2)
IWP -20S 76 in
193 cm
3 in
7.6 cm
IWP -25S 76 in
193 cm
3 in
7.6 cm
IWP -30S 76 in
193 cm
3 in
7.6 cm
AWP-15S 78 in
198 cm
3 in
7.6 cm
AWP-20S 78 in
198 cm
3 in
7.6 cm
AWP-25S 78 in
198 cm
3 in
7.6 cm
AWP-30S 78 in
198 cm
3 in
7.6 cm
AWP-36S 109 ½ in
278 cm
3 in
7.6 cm
AWP-40S 109 ½ in
278 cm
3 in
7.6 cm