2
Genie AWP
Part No. 33424
Operator’s Manual
Fourth Edition
Tip-over Hazards
Do not raise platform
unless base is level, all
four outriggers are
properly installed and
leveling jacks firmly
contact floor.
Do not adjust or remove
outriggers while platform
is occupied or raised.
Do not move machine while the platform is raised.
Do not place or attach overhanging loads to any
part of this machine.
Do not push off or pull toward any object outside
the platform.
Do not place ladders or scaffolds in platform or
against any part of this machine.
Do not use machine to lift material or equipment.
Machine is intended for personnel access only.
Do not raise platform unless machine is on firm,
level surface.
Do not use machine on a moving or mobile
surface or vehicle.
Do not raise platform in strong or gusty winds.
Do not exceed rated platform load capacity.
Maximum capacity
AWP-19
300 lbs
136kg
AWP-24
300 lbs
136kg
AWP-30
300 lbs
136kg
AWP-36
250 lbs
113kg
Maximum occupancy
1 person
Do not operate machine near drop-offs, holes,
bumps, debris, unstable or slippery surface or
other possible hazardous conditions.
Do not alter or disable machine components that
in any way affects safety and stability.
Do not replace items critical to stability with items
of different weight or specification. Use only Genie
authorized replacement parts.
When moving the machine with a forklift or other
transport vehicle, platform should be fully lowered,
machine should be turned off and no personnel
shall remain in platform.
Do not push the Genie AWP from the platform
side of the machine.
SAFETY RULES
