Part No. 33424
Genie AWP
15
Operator’s Manual
Fourth Edition
Tilting back
Machine
1 Slide out T-handle
until lock pin snaps
into place.
2 Two people should
lift the machine with
the T-handle to
mid-tilt position—casters on tilt-back frame
contact floor, and machine supported by
extended tilt-back strut.
3 Continue lifting until telescoping tilt-back strut is
completely compressed.
Returning Machine To
Standing Position
1 Be sure area below machine base and
T-handle is clear of personnel and obstructions.
2 Carefully pull down T-handle until machine
rests at mid-tilt
position.
3 Two people should
lower the machine
with the T-handle until
base casters are in
contact with ground.
4 Return sliding
T-handle to stowed position.
Stowing Tilt-back Assembly
1 Remove retaining pin.
2 Firmly grasp tilt-back frame and remove
tilt-back strut from strut socket.
3 Lift tilt-back frame,
hold in upright
position against
spring and secure
with retaining pin.
OPERATING INSTRUCTIONS
