Genie CCTV Rapport mini, Руководство пользователя

Страница: 4 / 20

FAR
OPEN
TELE
OSD
NEAR
CLOSE
WIDE
COM V/
300V 300V~
MAX
V
~
~♬
MODE SET
PWR
CHG
Tx
Rx
• Rapport mini • Accessories
BNC cable Power Adaptor
Test lead body cover
FAR
OPEN
TELE
OSD
NEAR
CLOSE
WIDE
COM V/
300V 300V~
MAX
V
~
~♬
MODE SET
PWR
CHG
Tx
Rx
RAPPORT MINI
MANUAL
manual
Rapport mini has a built-in Lithium Polymer
Battery.
It can be recharged using a DC12V power
adapter with an output of 1A or above and
reaches its full charge after a period in
excess of 5 hours. After the battery has been
fully charged for the first 2~3 charging
cycles, it can be used for approximately 6
hours (up to a Max.8 hrs in normal
operation).The battery can be recharged by
connecting it to the DC adapter, regardless of
OSD power, when the slider switch has been
turned on.
The discharge operation starts when the
Main Switch is turned on and it then
consumes power from the battery. Therefore,
when the Rapport mini is not being used for
a period of time, make sure the Main Switch
is turned off.
PRODUCT INTRODUCTION PRODUCT INTRODUCTION
Summary
Standard Items
Check the contents of your Rapport mini package against the standard checklist below :
Designed, with portability and serious CCTV engineers in mind, the Rapport mini is an
advanced piece of video test equipment consisting of many useful test functions
needed to professionally install a CCTV system; test functions include Service Monitor,
Multimeter, PTZ Test, RS-422 and RS-485 Communication Test, etc.
Test Leads
Adaptor
BNC to BNC Cable
RAPPOR MINI
MANU
AL
• Rapport mini Package
06 MULTI FUNCTION CCTV TESTER 07 MULTI FUNCTION CCTV TESTER