Genie CCTV Rapport mini, Руководство пользователя

Страница: 15 / 20

Each menu setting / value setting
ⓐ Go into the PTZ mode &
Exit button
ⓑ Change PTZ setting value
ⓒ Select PTZ setting
SET
SET
SET
SET
SET
FAR
OPEN
TELE
OSD
NEAR
CLOSE
WIDE
MODE SET
ⓐ
ⓑ ⓑ
ⓒ
ⓒ
PTZ NTSC
PTZ NTSC
MODE GO
MODE GO
SPD
15
GPST
001
SPST
001
FUNC
01
MENU
PTZ ADDR :001
PROTOCOL : (01)PELCO-D
BAUDRATE: 2 . 4Kbps
PARITY : NONE
SPD
15
GPST
001
SPST
001
FUNC
01
MENU
PTZ ADDR :001
PROTOCOL : (01)PELCO-D
BAUDRATE: 2 . 4Kbps
PARITY : NONE
PTZ NTSC
MODE GO
SPD
15
GPST
001
SPST
001
FUNC
01
MENU
PTZ ADDR :001
PROTOCOL : (01)PELCO-D
BAUDRATE: 2 . 4Kbps
PARITY : NONE
PTZ NTSC
SPD
15
GPST
001
SPST
001
FUNC
01
MENU
PTZ ADDR :001
PROTOCOL : (01)PELCO-D
BAUDRATE: 2 . 4Kbps
PARITY : NONE
MODE GO
FUNCTIONAL SPECIFICATION FUNCTIONAL SPECIFICATION
- PTZ Control Setup Screen
Press and hold the SET button for 2seconds until PTZ protocol menu activates.
PTZ control (Up, Down, Left, Right), is performed using the arrow keys.
How to Control a PTZ Camera
SPD (SPEED) : Move the cursor to the SPD
icon, using the procedures described above.
A total of 16 increments in speed (0 to 15)
are available
for selection using the keys.
PTZ functions - Up, Down, Left, Right movements are carried out using the SET
Button. Focus and Zoom adjustments are made using the FAR/NEAR (Focus) and
TELE/WIDE (Zoom) buttons.
GPST (GO TO PRESET) : Moves the camera
view to a designated preset location; Presets
are numbered 000 to 255. The cursor moves
to the GPST position when the key is
pressed. Select the previously stored
PRESET number using the & keys
(move by+1, -1 step). Once selection is
complete, press the key once more
and the camera will move to the PRESET
location.
SPST (SET PRESET) : Sets and stores
PRESET information in the range from 000
to 255. First, move the camera to the
required view and press the key, and
use the & keys to place the cursor at
the location of the chosen preset. Then set
up the address where the preset is to be
stored by using the & keys, and
press the key once more. The
location information is now stored as a
preset address.
FUNC (Function): User can set different
functions that automatically load the presets
of the camera system. The FUNC setup uses
the SPST and MENU information buttons for
the user to program various presets. The
different number of presets can range from
00 all the way to 63. The functions (presets)
can be programmed by the (+1), (-1)
buttons and steps by using the &
keys.
28 MULTI FUNCTION CCTV TESTER 29 MULTI FUNCTION CCTV TESTER