Genie CCTV HDMC221, Руководство пользователя

Страница: 22 / 32

22
Operating Your Camera
Special
When the SETUP menu screen is displayed,
select <SPECIAL> using the Function
Setup switch so the arrow indicates
<SPECIAL>
• Select a desired mode using the Function
Setup switch.
• CAM TITLE: If you enter a title, the title
appears on the monitor.
•
When the SPECIAL menu screen is displayed,
use the Function Setup switch so the arrow
indicates <CAM TITLE>
•
Set it to <ON> using the Function Setup
switch. Press the Function Setup switch.
•
Use the Function Setup switch to move to a
letter and select the letter by pressing the
Function Setup switch. Repeat this to enter
multiple letters. You can enter up to 15 letters.
•
Enter a title, move the cursor to <POS> and
press the Function Setup switch. The entered
title appears on the screen. Select the position
to display the title on the screen by using the
Function Setup switch and press the Function
Setup switch. When the position is
determined, select <END> and press the
Function Setup switch to return to the
SPECIAL menu.
•
When the CAM TITLE menu is 'OFF', no title is
displayed on the monitor screen even if you
enter one.
S ET UP
1. LENS MANUAL
2. EXPOSURE
←
3. WHITE BAL ATW
4. DAY&NIGHT AUTO
5. NR
←
6. SPECIAL
←
7. ADJUST
←
8. RESET ←
9. EXIT
←
SPECIAL
CAM TITLE OFF
D-EFFECT
←
MOTION OFF
PRIVACY OFF
LANGUAGE ENG
←
DEFEC
T
RS485
←
VERSION 0C0C00
RETURN RET
CAM TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K
L M N O P Q R S T U V
W X Y Z ▶ → ← ↑ ↓ ( )
¯ ­ - _
■
/ = & : ~ , .
ß à C L R P O S E N D
- - - - - - - - - - - - - - -
•
Only English is available in this mode. If you move the cursor to CLR and press the
Function Setup switch all the letters are deleted. To edit a letter, change the cursor to
the bottom left arrow and press the Function Setup switch. Move the cursor over the
letter to be edited, move the cursor to the letter to be inserted and then press the
Function Setup switch.