Genie CCTV HDMC221, Руководство пользователя

Страница: 19 / 32

19
Operating Your Camera
White Balance
Use the White Balance function to
adjust the screen colours.
• When the SETUP menu screen
is displayed select <WHITE BAL>,
using the Function Setup switch,
so the arrow indicates <WHITE BAL>.
• Select a desired mode using the
Function Setup switch. Select one
of the following 5 modes, as appropriate.
• ATW: Select this when the colour temperature is between 2,400K and
11,000K.
• OUTDOOR: Select this when the colour temperature is between
1,700K and 11,000K (sodium light inclusion).
• INDOOR: Select this when the colour temperature is between 4,500K
and 8,500K.
• MANUAL: Select this to fine-tune White Balance manually. Set White
Balance first using the ATW or AWC mode. After that switch to
MANUAL mode, fine-tune the White Balance and the Function Setup
switch.
• AWC -> SET: To find the optimal luminance level for the current
environment, point the camera toward a sheet of white paper and
press the Function Setup switch. If the environment changes, readjust
it.
• White Balance may not work properly under the following
conditions. In this case select the AWC mode.
• When the ambient illumination of the subject is dim.
• If the camera is directed towards a fluorescent light or
is installed in place where illumination changes
dramatically, the White Balance operation may
become unstable.
S E T U P
1. LENS MANUAL
2. EXPOSURE
←
3. WHITE BAL ATW
4. DAY&NIGHT AUTO
5. NR
←
6. SPECIAL
←
7. ADJUST
←
8. RESET
←
9. EXIT
←
☞