Genie CCTV HDC201, Инструкция по эксплуатации

Страница: 8 / 19

■
Installation
Megapixel HD-CCTV Day/Night Camera
15 14
Megapixel HD-CCTV Day/Night Camera
Take off the lens protection cap and attach
the CS-Mount lens to the camera by screwing
it in clockwise.
Note
ㆍ Use the specified lens connection parts as shown in the picture below.
The use of the wrong sized parts may cause damage
to the inside of the camera or result in poor fitting.
ㆍ Use of a lens which is too heavy affects the balance
of the camera and may cause a malfunction.
Please use a lens that weighs less than 450g.
ㆍ Select Av mode if possible when adjusting the
automatic light control (ALC) of an auto lens.
Use of PK mode may cause hunting.
1. Take off the lens protection cap and
attach the C-mount adaptor.
2. Attach the C-Mount lens to the
camera by screwing it in clockwise.
■
Connecting to a monitor
HD-SDI Output
ㆍ
Connect the HD-SDI output terminal located on the back of the
camera to the HD-SDI input port of the HD-SDI monitor.
Composite Output
ㆍ Connect the COMPOSITE output terminal located on the back of the
camera to the VIDEO input port of the monitor.
ㆍ
The connection method varies depending on the type of monitor and
accessories. Please refer to the monitor user manual.
ㆍ
Turn off the power when connecting.
When using a C-Mount lens
When using a CS-Mount lens