Genie CCTV HDC201, Инструкция по эксплуатации

Страница: 7 / 19

Megapixel HD-CCTV Day/Night Camera
13 12
Megapixel HD-CCTV Day/Night Camera
■
Installation Installation
■
Lenses are sold separately. Lenses such as auto iris lens, CS-Mount
lens and C-Mount lens can be used.
1. Peel off about 8mm of the outer skin of the auto iris lens cable.
2. Peel off about 2mm of the outer skin of the insulated conductor inside
thelens cable.
■
Lens
Note
ㆍ Use of the DC auto iris lens is recommended to achieve the best
results for operating this product effectively.
ㆍ
Keep the lens clean.
ㆍ
Any foreign objects and fingermarks on the lens can cause inferior
image quality in low light level conditions.
3. Remove the cover of the auto iris lens connection plug and solder the lens
cable to the connector pin in the plug.
4. Replace the auto iris lens connection plug cover and take off the lens
protection cap, and then attach the auto iris lens to the camera by screwing
it in clockwise.
5. Insert the connection plug that is connected to the auto iris lens cable into
the auto lens connector, which is located on the back of the camera.
Pin No. LENS
No.1 Pin
Damping-
No.2 Pin
No.3 Pin
Drive+
No.4 Pin Dreve-
When using an DC auto iris lens