TM
Model: SHIVA-200R scanner
Dimensions: 670x300x180mm
Lamp: HSD-200 or MSD-200
Voltage: 230V~50Hz
Weight: 15 kgs
Power consumption: 300VA
Fuse: T5A/250V 20mm
Signal: USITT DMX512
Signal connection: 3-pin XLR
Signal termination: built-in (manual)
Addressing: Standard DMX512 9-pin binary
Channels: 6
Product Specifications
10
TM
Model: SHIVA-150R scanner
Dimensions: 670x300x180mm
Lamp:
PHILIPS CDM-SA/T 150W/942
Voltage: 120V~60Hz
Weight: 15.4 kgs
Power consumption: 300VA
Fuse: T5A/250V 20mm
Signal: USITT DMX512
Signal connection: 3-pin XLR
Signal termination: built-in (manual)
Addressing: Standard DMX512 9-pin binary
Channels: 6
TM
Model: SHIVA-250R scanner
Dimensions: 670x300x180mm
Lamp: 24V/250W EHJ 64655 G6.35
or 24V/250W EHJ 64657 G6.35
Voltage: 230V~50Hz; 120V~50/60Hz
Weight: 15 kgs
Power consumption: 300VA
Fuse: T5A/250V 20mm
Signal: USITT DMX512
Signal connection: 3-pin XLR
Signal termination: built-in (manual)
Addressing: Standard DMX512 9-pin binary
Channels: 6
TM
Model: SHIVA-200R scanner
Dimensions: 670x300x180mm
Lamp: HSD-200 or MSD-200
Voltage: 120V~60Hz
Weight: 13 kgs
Power consumption: 500VA
Fuse: 7A/250V 20mm
Signal: USITT DMX512
Signal connection: 3-pin XLR
Signal termination: built-in (manual)
Addressing: Standard DMX512 9-pin binary
Channels: 6
5
3. Rotate lens to obtain a sharp focus.
2. The scanner shutter will open, pan and tilt will align to center, and a
small white spot will appear for easy focusing.
1. Set Function dip switch #7 to the "on" position.
6. The lamp will light (but may be covered by the shutter). You might hear the
color and gobo wheels reset and pause. New scanners sometimes smoke
and emit an odor briefly as paint and dust are burnt away.
7. external flexible cable or cord of this luminaire is damaged, it shall be
replaced by a special cord or cord exclusively available from the
manufacturer or his service agent.
5. Check that your power supply and th e specifie d scanne r voltag e a re t he
same. Plug mains power cord into the IEC socket (B5) on the back of unit.
Plug the mains power cord into properly grounded power supply.
4. Avoid signa l interferenc e b y flippi ng Funct ion dip sw itch #8 to the "on"
position on the last scanner in a series of DMX units.
3. Set scanner DMX addresses by flipping the appropriate DMX dip switches .
For more information, see
Appendi x 1
, th e
DMX5 12 Addre ss Ch
a
rt
a nd
the guide
DMX512 Basics
.
1. Use a 35-kg rate d or strong er cla mp to
secure the scanner bracket (A1) onto a firm
truss. Tilt unit as desired a nd t ighten s canner
bracket knobs (A5). Allow at least onem
eter
on all sides fo r prope r coolin g. Kee p u nit
away from liquids and flammable items.
Lastly, pass safety rope (A7) through bracket of
the unit, hitch the safety rope round the truss and
buckle it up.
Scanner Installation
Focusing the Lens
2. Link DMX512 signa l cable s to the D MX
sockets B8 and B10 o n t he b ack p late o f t he
scanner. "Dais y cha in" the scan ne rs as
illustrated in the guide
DM X Basics
. Alway s use
120 ohm shiel ded, 22 or 24 AWG, braided shield microphone cables and
three-pin canon XLR connectors.
hig
h qual
ity, tw
isted pair
