Short user description Genexis router
This document gives a short description how to install and how to configure the Genexis router.
Product overview
The front of the router
The front of the router is shown below. The status LEDs on the front of the router can be used
to get status information. A short description is given in the table below.
LED
Activity
Description
PWR
ON (green)
BLINK (green)
OFF (green)
ON (red)
Power connected
Warning
Power not connected
Hardware error
WAN
ON
OFF
Optical link
No optical link
RTV
ON
OFF
CATV enabled
CATV disabled
M1
ON
BLINK
OFF
Provisioning OK
Provisioning in progress
Provisioning inactive
M2
ON
BLINK
OFF
Firmware update successful,
unit will restart automatically
Firmware update in progress
Firmware update inactive
M3
ON
BLINK
OFF
Routing OK
Routing initialization in progress
Routing inactive
T1
ON
BLINK
OFF
Voice OK on line T1
Voice initialization in progress
Voice inactive on line T1
T2
ON
BLINK
OFF
Voice OK on line T2
Voice initialization in progress
Voice inactive on line T2
Copyright © Genexis BV. All rights reserved
09-2009 v1
