Remove dust cap
1. Take the FiberTwist XGS2410 out of the box.
2. The dust cap is connected to the red string
located on the rear of the FiberTwist XGS2410.
3. Remove the dust cap by pulling the red string.
4. Store the dust cap in a safe place.
Twist!
1. Place the FiberTwist XGS2410 on the FTU/Bracket as shown in the picture below.
2. Rotate clockwise until it clicks into place.
3. Make sure the FiberTwist XGS2410 is aligned squarely on the FTU/Bracket.
Your FiberTwist XGS2410 is now installed!
