FiberTwist XGS2410 is installed on an FTU/Bracket
Box contents
• Genexis FiberTwist XGS2410
• Power adapter
• Labels (self-adhesive)
Label
More information can be found on the
product label which is positioned on the
bottom of the Active Device.
Preparation
Ensure there is a power socket
within reach of where the device
is being installed.
Important:
Instructions need to be
followed precisely and uninterrupted. This
minimizes the risk of damage (a severe
degradation of signal quality) to the fiber
optic connectors
Various translations of this document (if available) and additional product information can be
found on
https://genexis.eu/product/fibertwist/downloads
Installation guide
Remove Blind Cover or active device (if present)
1. Press and hold the unlock button (on the right side of the Blind Cover or active device).
2. Rotate the Blind Cover or active device counterclockwise till it blocks.
3. Remove the Blind Cover or active device from the baseplate (FTU/Bracket) by pulling
it towards yourself.
4. Store the Blind Cover or active device in a safe place.
