Items in the menu are as follows:
(recommended settings are highlighted)
Sensitivity:
Highway
/ City / Auto City
Setting the speed in Auto City (item is present only if the sensitivity is set to Auto City): Through
you are selecting
Middle button
between speeds for editing (left number indicates the speed below which the detector will not respond to alerts. Right number
indicates the speed below which the detector will detect alerts like in City mode).
+ / -
buttons on the right side of the detector change
the specific speed. When detector is set up to “20 50” speed below 20 km/h on the radar will not respond. In the velocity range 20-50
km/h will only respond to stronger radar signals. Maximum detector sensitivity on the radar starts from 50 km/h.
Setting values City and Auto City sensitivity (entry is present only if the detector sensitivity is set to other than Highway):
Via Middle
button
+ / -
you can select radar band for editing. To change the signal level which will respond to radar signals use
. The level of
suppression can be selected in the range 0-9. For example, when setting is K2 and Ka2 the level of detection in all bands are slightly
decreased.
Display Mode:
Speed/Time
, Speed/Voltage, Battery Voltage, Time, Speed, Speed/Compass
Alert type:
Voice first
/ Beep first / No voice - Allows you to set if you want to be alerted first via voice alert or beeping sound.
Auto Mute:
On
/ Off:
If it´s activated, after two seconds of ongoing alert the volume will be reduced.
The minimum speed for signaling radar: Off, 10 km/h,
20 km/h
, 30km/h ......... .. 130 km/h
K-Band: Wide / Narrow / Instant Only /
Off
(In countries, where police use K band radars, it is recommend to use K Narrow setting)
K Filter:
Off
/ Low / High - Filtering false alerts from blind spots and ACC. (When K Filter is activated, pulsed radars such as Iskra are not
detected)
Radar Detector
Genevo One M
3
