GeneSys Elektronik GmbH
In der Spöck 10
77656 Offenburg
Germany +49 (0) 781 96 92 79
–
0 [email protected] www.genesys-offenburg.de
ADMA 3.5 Quick Start Guide.docx
Seite / Page 21 / 32
DATA
Measurement Data
Configure sampling rate and Coordinate
System for measurement.
CAN
Data output
Select data format and needed data
packets for measurement via CAN
interface.
Ethernet Data output
Define the data format and destination
IP/Port for the Ethernet data output of the
measurement data via UDP.
To use the Ethernet Broadcast function
set the last character to 255.
AUX SYSTEMS
DGNSS Option
Use the DGNSS Preset to configure the
correction data reception via Radio
Modem or WLAN from a GeneSys BASE
Station or via NTRIP (GPRS) from a
correction data service (e.g. SAPOS, AXIO-
NET, ...).
External velocity
Additional speed sensor, e.g. Correvit for
system augmentation especially in case of
GNSS outages.