Genesis React Pro, Руководство пользователя

Страница: 33 / 88

33
ReACT Pro
FO2 SET FOR USE WITH AIR
When FO2 is set for AIR (Fig. 25), the ReACT Pro will perform calculations the same as if FO2
were set for 21%, internally accounting for oxygen loading for any subsequent Nitrox dives.
Once a dive is made with the unit set as a NITROX computer (e.g., FO2 set for a numerical
value), the unit cannot be programmed to operate as an AIR computer until 24 hours after the
last dive. AIR will not be displayed as an option in the FO2 Set Mode. You can however set
FO2 for 21% for use with Air.
FO2 SET FOR USE WITH NITROX
If FO2 is set at a value of 21% (Fig. 26), the unit will remain set as a 21% NITROX computer for
subsequent dives until FO2 is set to a higher value (22 to 50%), or until it automatically turns off
and is reactivated.
WARNING: When the FO2 default is set On, the FO2 value must be set for
each repetitive nitrox dive, or the value will automatically be 50 and the
dives will be calculated based on 50% O2 for oxygen calculations and 21%
O2 (79% nitrogen) for nitrogen calculations.
FO2 50% Default ON
When the FO2 50% Default feature is set ON and FO2 is set at a value of 22 to 50% to match the
nitrox mix being used for that nitrox dive, the FO2 setting after that dive will automatically de-
fault to a value of 50% (Fig. 27A).
AIR
E
D
D
C
O
MAX MAX FT FT
NITROX
E
D
D
C
O
NITROX
E
D
E
C
O
Fig. 27A - FO2 Default ON
Fig. 25 - FO2 Set For AIR
Fig. 26 - FO2 Set for 21%