Genesis React Pro, Руководство пользователя

Страница: 32 / 88

32
PRE DIVE MODES
While in the Surface Mode, press the LEFT button to view Temperature (Fig. 23).
Press the RIGHT button to activate the Hydroglow™ backlight.
The LEFT button is also used to access FO2, Plan, Fly, and Log Modes.
NOTE: Fly and Log modes are considered Post Dive modes and are
described in the next section of this manual.
FO2 MODE
The ReACT Pro can be set for use either as an AIR computer or as a NITROX computer. After
activation, it will operate as an AIR computer without displaying information associated with
oxygen calculations, unless it is set for a percentage of oxygen (FO2) other than Air (e.g., a nu-
merical value between 21 and 50 %).
If your ReACT Pro is set for use with Air as your breathing gas, the symbol AIR will be dis-
played (Fig. 23a) during all modes except the Set, Fly, and Gauge modes. If it is set for use with
Nitrox, the symbol NITROX will be displayed (Fig. 24a).
WARNING: When set for use with Nitrox, you must verify that the FO2
setting correctly matches the Nitrox Mix being used prior to each Nitrox
dive.
N
E
D
AIR
a
Fig. 23 - Temperature
Set for Air Operating Mode
Fig. 24 - Set for Nitrox
AM AM
NITROX
E
D
a