L
USER MANUAL
The Keypad
Key
Function
0
to
9
The numbered buttons on the keypad allow you to enter
your PIN or enter information.
C
This button is used to clear information or cancel an action.
If in doubt at any stage, press
C
a couple times to exit
out of the operation. It is also used to enter the RAS menu
E
button is used to accept information, and to acknowledge
messages.
A
This is used to arm an area, or turn on the displayed option.
B
This is used to disarm an area, or turn off the displayed
option.
>
The Next button is used to view the next available option on
the RAS.
<
The Previous button is used to view the previous available
RAS option.
LED Lights
There are 4 indicator LED lights located just below the LCD display. They are marked A,
B, C, and D. These lights can be pre-programmed by the installation Company to indicate
system status at a glance. Because these lights can be pre-programmed to indicate a
variety of functions you may want your technician to log their meaning, in the table
provided below.
Key
Function
LED A
LED B
LED C
LED D
Genesis V4.0 User Manual, Issue 1, January 2005
Page 7 of 38
