L
USER MANUAL
Control Menu (continued)
– Use the
<
or
>
keys to scroll through the inputs until you
reach the input to isolate or de-isolate. When the selected input is
displayed, press
A
to isolate, or press
B
to de-isolate.
Isolated inputs will not register as being unsealed, and as such will
not cause alarm conditions. You can direct enter the input number.
– If you have accidentally triggered the user Duress code, it is
possible to send a Cancel Duress signal to indicate this to a
control room. After selecting this menu option, press
B
to
activate the Cancel Duress function. It is recommended that the
user then contacts their control room to verbally confirm this
cancellation as soon as possible.
Note: This function is only available if advised by your
Installation Company.
– It is possible to send a signal to your control room to indicate a
need for a service technician to attend. After selecting this menu
option, press
A
to activate the Service Request function.
Note: This function is only available if advised by your
Installation Company.
– This option is reserved for installers only. Do not use.
Isolate Input
?
Cancel Duress
?
Service Request
?
Modem On / Off
?
Press
C
twice to exit all Menu’s at any time, this will take you back to step 1.
Genesis V4.0 User Manual, Issue 1, January 2005
Page 17 of 38
