Programming: Display and Instructions
Programming Instructions
Manual / Delayed Regeneration
Pressing
at any time results in an immediate manual regeneration.
Pressing and holding
for 3 seconds, when system is locked, results in a delayed regeneration at the preselected time.
One Button to Change the Current Time
Pressing and holding the
button for 3 seconds, when system is locked, allows the current time of day to be adjusted.
Unlocking the Keypad
icon indicates the buttons are locked within 5 minutes of idle use. To unlock press and hold
and
for 3 seconds
until the icon is off.
Enter Key
Press
button to enter the basic programming mode, modify highlighted options, and return to the main menu.
Manual Regen/Esc. Key
Press
at any phase during manual regeneration to advance to the next phase or press during programming to exit
to the home screen without modifying the current highlighted option.
Up and Down Arrows
or
buttons are used to scroll through the various basic programming options as well as adjust values.
Programming Modes
•
Basic Programming – Allows you to adjust the time values for each phase. To enter basic programming, follow the
directions below.
∗
When the icon is on, press and hold both
and
for 3 seconds to unlock the keypad; then press
to enter the
main menu; press
or to highlight each option. Press
to enter that option. Press
or
to adjust the value.
Press
to accept changes. (Press
to exit back to service status
)
9
