background image

 

1N00-510 Genesis 80cm Boat v1.1 02/04 

©Tornado International Ltd. 2003 

-17- 

Confidential 

 Risk  of  personal  injury  or  damage  to  the  equipment.  Only  use  the  power 
supply supplied by Tornado for this equipment. 
Caution! 
 Always replace the power supply fuse with one of identical type and rating. 
The  power  supply  is  designed  to  be  operated  only  in  locations  which  are 
protected from water.  
Caution! 
 Ingress of water will lead to severe damage to the power supply. 
Caution! 
 It  is  important  to  ensure  that  there  is  sufficient  ventilation  to  provide  an 
adequate flow of cooling air over the heat sink at the rear of the unit. 
 
2.19 The Power Supply Lead 
The  PSU  lead  is  used  to  connect  the  power  supply  to  the  transmitter 
motherboard in the master console. It is fitted with a different socket at each 
end.  The socket at each end must be fully inserted into the plug and the catch 
checked  to  ensure  it  is  correctly  latched.  A  damaged  power  supply  lead 
should be replaced. 
Caution! 
 The  power  supply  lead  must  not  be  lengthened  without  reference  to  the 
Tornado technical department. 

Содержание 1N00-510



























Отзывы: