1N00-510 Genesis 80cm Boat v1.1 02/04
©Tornado International Ltd. 2003
-16-
Confidential
2.14 The Console Connection Sockets
These are mounted along the bottom of the transmitter motherboard (Diagram
2.09). They are numbered to correspond with the console numbers.
Note!
If your set has less than 12 models it is essential that shorting plugs are fitted
to all unused console sockets on the transmitter motherboard. The red “fault”
LED will light if any socket is empty.
2.15 24V Power Socket
This is mounted at the bottom of the transmitter motherboard (Diagram 2.09).
It is the connection for the power supply lead. The power is distributed to the
rest of the system via the console cables.
2.16 Diagnostic Socket
This is provided for the use of Tornado service engineers. Do not connect to
this socket.
2.17 Accessory Socket
This is provided for the attachment of Tornado accessories. Instructions will
be provided with the accessory.
2.18 The Power Supply Unit
The power supply converts local mains voltage (100-120v or 220-240v AC) to
24volts AC. This to ensure the safety of the players. A power switch, fuse and
output socket are located on the front of the unit. It is this power switch which
is used to turn the set on and off.
Warning!
