background image

 

1

1.

 

BEFORE RIDING 

This manual describes the correct usage of this motorcycle including safety riding, simple inspection 
methods and so on. 

For a more comfortable and safety riding, please read this manual carefully. 
 

 

Thank you very much for your trust in our product 

In order to maximize your motorcycle’s performance, a periodical inspection and maintenance 
should be completely carried out. We recommend that after riding your new motorcycle for the first 

500 kilometers, you should take your motorcycle to the original dealer for an initial inspection. 
Please notice that you loose the warranty rights if you miss the inspections. 

 
 

z

 

In case the motorcycle’s specifications and construction are modified and different from the photos 
and diagrams on the owner’s manual/catalogues, the specifications and construction of the actual 

motorcycle shall prevail. 

 

2.

 

SAFE RIDING 

It is very important to be relaxed and clothe properly when driving, observe traffic regulations, do not 

rush, always drive carefully and relaxed. 
Usually, most people would ride their newly bought motorcycle very carefully, but after they became 

familiar with their motorcycles, they tended to become reckless which may result in an accident. 
 

 

 To remind you: 

z

 

Please wear a safety helmet, and properly tighten the chin belt when riding a motorcycle. 

z

 

Clothes with open or loose cuffs may be blown by wind and cause the cuffs to get caught on the 
steering handle and thus affects riding safety. So, put on clothes with tight sleeves. 

z

 

Hold the steering handle by both hands when riding. Never ride with only one hand. 

z

 

Observe the speed limit. 

z

 

Perform periodical maintenance and inspection in accordance with the schedule. 

 

 
WARNING!! 

z

 

To avoid getting burned by exhaust pipe when taking a passenger. Make sure your passenger has 

put his/her feet on the pedals. 

z

 

After running, the exhaust pipe is very hot, be careful not to get burned when conducting an 

inspection or maintenance. 

z

 

After running, the exhaust pipe is very hot; select a suitable location to park your motorcycle to 

avoid others getting burned by the exhaust pipe. 

Содержание Ideo 50
























Отзывы: