18
CHECKING THE SPARK PLUG
z
Remove the cap of high tension cable. (Use a plug wrench in tool box to remove the spark plug by
turning it counterclockwise.)
z
Check the electrode if it is dirty or fouled by carbon deposits.
z
Remove the carbon deposits on the electrode with steel wire, and clean the spark plug with
gasoline, then, wipe dry with a rag.
z
Check the electrode, and adjust its gap to 0.6~0.7mm. (Check it with a feeler gauge)
z
Hand tight the spark plug as far as it can go and then tighten it another 1/2~3/4 turns with a wrench.
WARNING:
The engine is very hot after running. Pay attention not to get burned.
Use only spark plugs suitable for the engine specifications of this motorcycle recommended by the
manufacturer. (Refer to specifications.)
CHECKING THE AIR CLEANER
DISASSEMBLE PRCEDURE
1.
Remove the screw of air cleaner cover.
2.
Remove the air cleaner cover and then the cleaner’s element.
3.
Clean or replace the element.
(For checking interval please refer to maintenance schedule.)
4.
Refer to figures shown on the right for air cleaner element
cleaning steps.
ASSEMBLE PRCEDURE
z
Assemble the air cleaner in reverse order of disassemble.
CAUTION:
z
Dust deposit is one of the major causes of reducing output
horsepower and increasing fuel consumption.
z
Change the air cleaner element more frequently to prolong the
engine’s service life if the motorcycle is driven on dusty roads
very often.
z
If air cleaner is installed improperly, dust will be absorbed into
cylinders, which may cause a premature wear and reducing
output power and engine life.
z
Be careful not to soak the air cleaner when washing the
motorcycle. Otherwise, it will cause engine hard to start.
Procedures for cleaning air
cleaner element:
1. Clean
2. Squeeze dry
3. Soak in engine oil.
4. Squeeze dry
Содержание Ideo 50
Страница 1: ...Ideo 50 Type FCC Reservedele...
