54
Englis
h
5
Push “START” button in controller according the next figure.
The generator will start a fully automatic boot sequence with several boot
attempts.
NOTE: Do not interrupt the sequence of start up by pressing START /
STOP again, let stop the maneuver before executing another command.
OPD (output power delayed), Once the engine is started, the generator will run
for a few seconds without power output. After a few seconds when the voltage
and frequency are stable, the power output will start. This ensures the unit start
without loads.
6
When you want to stop the generator, press the "STOP" button on the remote
control according to the lower figure.
